Earth Pressure Balance‑Slurry Dual‑Mode Shield Machine
2026-11-11
Abstract: This paper focuses on the earth pressure balance (EPB)‑slurry dual‑mode shield machine, defines its applicable strata and typical engineering scenarios, and elaborates respectively on the working principles and pressure control logic under EPB and slurry tunnelling modes. According to the pressure regulation mechanism of the excavation chamber, the equipment is classified into the direct‑controlled single‑cabin type and the indirect‑controlled air‑cushion double‑cabin type, whose advantages and disadvantages are compared. Finally, from four dimensions including cabin structure, crusher layout, pipeline configuration and grouting logic of the air‑cushion chamber, this paper clarifies the core design differences between the indirect‑controlled dual‑mode shield and the conventional indirect‑controlled air‑cushion slurry shield. The research can provide a technical basis for type selection, structural design and mode‑switching construction of dual‑mode shields for composite‑stratum tunnels. 【This article is compiled for popular science purposes in the industry. Part of the technical data refers to publicly available professional literature.】
In urban rail transit, river‑crossing, sea‑crossing and inter‑city tunnel projects, tunnel alignments frequently pass through composite strata characterized by alternating soft‑hard layers and highly variable water permeability. Single earth‑pressure‑balance shield or single slurry‑balance shield often cannot satisfy both tunnelling efficiency and settlement control requirements. As the most widely adopted model in the dual‑mode shield family, the EPB‑slurry dual‑mode shield integrates two sets of tunnelling systems (EPB and slurry balance) into one main shield machine. It is equipped with two independent mucking systems: screw‑conveyor mucking and slurry‑pipeline mucking. Tunnelling modes can be switched in the main control room without machine disassembly or modification, making it specially applicable to complex tunnel projects with frequently varying strata along the alignment.
Dual‑mode shields are generally divided into three categories: EPB‑slurry dual‑mode, EPB‑TBM dual‑mode and slurry‑TBM dual‑mode. This paper mainly introduces the EPB‑slurry dual‑mode shield.

Ⅰ Scope of Application
The prominent advantage of the EPB‑slurry dual‑mode shield lies in its adaptability to strata for both EPB and slurry shields. It is suitable for engineering projects with remarkably segmented differences in geological and hydrogeological conditions within one tunnel section:
1.Sections applicable to EPB mode: Low‑permeability strata with fine‑grained soils and good self‑stability, such as clay, mudstone and silty clay, where formation water pressure ≤ 3 bar. This mode delivers high tunnelling efficiency and low slurry‑treatment cost, and fits sections with sparse surface buildings and structures and moderate settlement‑control requirements.
2. Sections applicable to slurry balance mode: Highly permeable soft strata such as silty fine sand, round‑gravel layers and sandy‑cobble strata, high‑water‑pressure strata, karst water‑rich strata, as well as sensitive sections passing beneath old buildings, dense pipelines and operating metro lines with stringent surface‑settlement control requirements. Relying on slurry‑film support for the tunnel face, it causes minor stratum disturbance and achieves high‑precision settlement control.
3.Typical engineering scenarios: River‑crossing composite‑stratum tunnels, long‑distance composite‑stratum metro tunnels in central urban areas, and shallow‑buried tunnels passing beneath high‑risk sensitive structures.
Additional engineering advantages: When tunnelling under slurry balance mode, the screw conveyor can discharge large‑size boulders and rock fragments, lowering the risk of slurry pipeline blockage and reducing man‑entry hyperbaric intervention for muck removal. When tunnelling under EPB mode, the slurry system can inject slurry into the excavation chamber as required for pressure maintenance and slurry‑film preparation, satisfying working conditions for hyperbaric maintenance under shutdown status.
Ⅱ Working Principles
The EPB‑slurry dual‑mode shield is provided with two independent excavation‑face support and mucking systems. Switching between the two tunnelling modes is realised via valve groups in the main control room without disassembly of main‑machine structures.
1.Earth‑Pressure‑Balance Tunnelling Mode

Modified muck inside the excavation chamber acts as the supporting medium. The earth pressure inside the chamber is established by dynamically matching muck inflow, screw‑conveyor mucking rate and thrust‑cylinder thrust, so as to balance the water‑earth pressure on the tunnel face.
Earth‑pressure sensors are installed on the bulkhead of the excavation chamber and the barrel of the screw conveyor to collect real‑time chamber pressure. The rotational speed of the screw conveyor, advance rate and foam/bentonite injection dosage are dynamically adjusted to control surface settlement. Foam and bentonite slurry are injected onto the tunnel face through the central swivel joint and built‑in pipelines of the cutterhead to condition muck, endowing muck with plasticity, flowability and water‑sealing capacity. A soil‑plug water‑sealing structure is formed inside the screw conveyor. Muck is discharged onto the backup belt conveyor by the screw conveyor and transported to the ground by backup trailers.
Under this mode, the slurry system can function as an auxiliary unit: it can inject supplementary slurry into the excavation chamber to support soil mass at the top of the tunnel face and further mitigate settlement; it can also be used for shutdown pressure retention and slurry‑film preparation to implement hyperbaric maintenance with personnel entering the chamber.
2. Slurry‑Balance Tunnelling Mode

Pressurised slurry serves as the active supporting medium for the excavation face. The water‑earth pressure of the tunnel face is balanced by slurry pressure within the excavation chamber (air‑cushion chamber).
The slurry circulation system continuously feeds slurry to the cutterhead and excavation chamber. Slurry penetrates the tunnel face and forms a dense filter‑cake membrane to prevent groundwater loss. Excavated muck mixes with slurry to form muck‑slurry, which is conveyed to the ground slurry‑separation station through slurry‑discharge pipelines and slurry discharge pumps. After muck screening and separation, slurry is recycled for reuse.
- Direct‑controlled type: The slurry pressure in the excavation chamber is directly adjusted by the flow difference between feed slurry and discharge slurry.
- Indirect‑controlled type (air‑cushion type): Compressed air acts on the slurry liquid level in the air‑cushion chamber. Air pressure is transmitted to the excavation chamber via connecting pipes, and pressure fluctuation is buffered by air pressure to stabilise chamber pressure.
Ⅲ Classification of EPB‑Slurry Dual‑Mode Shields
According to the excavation‑face pressure‑control mechanism under slurry‑balance mode, dual‑mode shields are divided into direct‑controlled type and indirect‑controlled (air‑cushion) type.
1. Direct‑Controlled Type (Single‑Cabin Structure)
The excavation chamber adopts a single‑cabin structure. The slurry‑inlet port, slurry‑discharge port and screw‑conveyor mucking outlet are all arranged on the rear bulkhead of the excavation chamber. The slurry pressure inside the excavation chamber is directly regulated by the flow difference between feed and discharge slurry to balance the water‑earth pressure on the tunnel face.
Advantages: Relatively simple structure; it can be retrofitted from a conventional EPB shield with controllable modification cost.
Disadvantages: The slurry pressure in the excavation chamber is significantly disturbed by pump‑set flow and muck output from strata, resulting in severe pressure fluctuation. It is difficult to guarantee tunnel‑face stability, and operational parameter adjustment is complex.
2. Indirect‑Controlled Type (Air‑Cushion Double‑Cabin Structure)
A double‑cabin configuration consisting of excavation chamber and air‑cushion chamber is adopted. Compressed air is stored in the air‑cushion chamber. Gas pressure is transmitted to the slurry liquid level of the excavation chamber via connecting pipes to indirectly stabilise supporting pressure in the excavation chamber. Pressure fluctuation induced by tunnelling disturbance is counteracted by adjusting the compressed‑air pressure of the air‑cushion chamber.
Advantages: Stable supporting pressure inside the chamber with minor fluctuation, reliable tunnel‑face stability, high‑precision stratum‑settlement control and simple parameter tuning; superior adaptability to water‑rich highly‑permeable strata.
Disadvantages: Complex shield‑body structure; the air‑cushion chamber is non‑full‑ring layout and generally requires custom‑built manufacturing, leading to high production cost.
Ⅳ Differences between Indirect‑Controlled EPB‑Slurry Dual‑Mode Shield and Indirect‑Controlled Slurry Shield
Both machines adopt the air‑cushion‑chamber air‑pressure stabilisation principle and are equipped with air‑cushion‑chamber structures in appearance. Nevertheless, they differ in design objectives, system configuration, cabin structure and supporting logic, with four essential distinctions as listed below:
1. Difference in cabin structure and pressure‑transmission channel
For the indirect‑controlled EPB‑slurry dual‑mode shield, the slurry‑discharge port is located at the bottom of the excavation chamber. To reserve installation space for the screw conveyor, the air‑cushion chamber adopts a non‑full‑ring layout, and pressure is transmitted between the air‑cushion chamber and excavation chamber through connecting pipes.
For conventional indirect‑controlled slurry shields, the air‑cushion chamber is of full‑ring enclosed structure, and pressure transfer between air‑cushion chamber and slurry chamber is realised by slurry gates.
2. Difference in crusher layout schemes
Restricted by space occupation of the screw conveyor, the indirect‑controlled EPB‑slurry dual‑mode shield can only adopt an outside‑cabin crusher instead of an in‑cabin crusher.
Free from spatial constraints of the screw conveyor, conventional indirect‑controlled slurry shields can select either in‑cabin crusher or outside‑cabin crusher.
3. Difference in pipeline‑system configuration
The indirect‑controlled EPB‑slurry dual‑mode shield must be fitted with an on‑board bypass pipe, which acts as an indispensable passage for mode switching between EPB and slurry modes as well as circulation switching.
Conventional indirect‑controlled slurry shields operate under single slurry mode and are generally not equipped with on‑board bypass pipes.
4. Difference in operation logic of air‑cushion‑chamber slurry‑feed pipeline
For the indirect‑controlled EPB‑slurry dual‑mode shield, the slurry‑feed pipeline of the air‑cushion chamber must remain fully open throughout tunnelling under slurry‑balance mode, so as to guarantee unobstructed connecting pipes and continuous & stable pressure transmission.
For conventional indirect‑controlled slurry shields, the air‑cushion‑chamber slurry‑feed branch can be opened or closed flexibly according to tunnelling conditions and slurry‑circulation requirements.
References:
DU Yanliang. Training Course for Shield Machine Practitioners[M]. Fuzhou: Fujian Science and Technology Press, 2022.
Note: This article is only for industry technical popular science. Part of technical principles refer to the above‑mentioned publicly‑available professional book. All viewpoints herein are for industry exchange only.
NEWS
Earth Pressure TBM Dual-mode Shield and Slurry TBM Dual-mode Shield
Abstract:In long-distance tunnel construction, composite strata with alternating soft soil, fractured surrounding rock and hard rock impose stringent requirements on tunnelling equipment. A single-type shield or TBM often fails to satisfy the requirements of construction safety, ground settlement control and tunnelling efficiency simultaneously. As mainstream composite tunnelling machines, earth pressure TBM dual-mode shields and slurry TBM dual-mode shields are capable of switching between soft-soil balanced tunnelling mode and hard-rock TBM tunnelling mode, making them suitable for tunnel projects with variable geological conditions. This paper introduces the application scope and working principle of the two types of dual-mode shields respectively, and conducts a comparative analysis from dimensions including face stabilization mechanism, mucking method, supporting facilities, construction cost and risk characteristics. It clarifies the selection boundary of the two machines and provides technical references for equipment selection in metro tunnels, water diversion tunnels, river-crossing and sea-crossing tunnels and other projects.
Earth Pressure Balance‑Slurry Dual‑Mode Shield Machine
Abstract: This paper focuses on the earth pressure balance (EPB)‑slurry dual‑mode shield machine, defines its applicable strata and typical engineering scenarios, and elaborates respectively on the working principles and pressure control logic under EPB and slurry tunnelling modes. According to the pressure regulation mechanism of the excavation chamber, the equipment is classified into the direct‑controlled single‑cabin type and the indirect‑controlled air‑cushion double‑cabin type, whose advantages and disadvantages are compared. Finally, from four dimensions including cabin structure, crusher layout, pipeline configuration and grouting logic of the air‑cushion chamber, this paper clarifies the core design differences between the indirect‑controlled dual‑mode shield and the conventional indirect‑controlled air‑cushion slurry shield. The research can provide a technical basis for type selection, structural design and mode‑switching construction of dual‑mode shields for composite‑stratum tunnels. 【This article is compiled for popular science purposes in the industry. Part of the technical data refers to publicly available professional literature.】
Contact us